Ready made kits (500mm size) allow quick and easy installation - customised kits can be cut to any size required. This enables you to try the system on one drawer, explore its possibilities and calculate its benifits.

Benefits:

• Greater efficiency as you can easily view and select the required items.
• Less confusion from jumbled products when you open the drawer.
• More space - the system will help you re-organise your items and so provide more space.
• Empty spaces clearly indicate out of stock items.
• Easily adjusts as your stock requirements and package sizes change.

Slotted Rail Holder

To attach to the front and back of the drawer. The space within each slot is 3mm. Available in two heights - 35mm and 55mm. For higher drawers and higher drawer rails, a combination of the two sizes may be used.

Drawer Rail

This slots into the slotted rail holder (front to back). You need to decide how many lengthway spaces you need - you order one less divider than the total spaces required, e.g. for four spaces you will need 3 dividers.

Drawer rail is available in aluminium or acrylic (both 3mm thick). The aluminium is more suitable for longer lengths as it is more rigid. For much longer lengths a self adhesive T-bar may give more stability. The T adheres to the base of the drawer. It cannot be moved easily like the drawer rail and so is not as flexible. To calculate how much you need, measure the inside of the drawer front to back.

It is stocked in 1 metre lengths. We will cut to length if requested but can not accept responsibility for your measurements, so please measure very carefully.

Dividers

If you wish to also divide your drawer crossways you will need to purchase additional dividers. You will need the same height dividers as drawer rail (35mm/55mm/100mm). The 150mm uses an acrylic plain divider fixed on with a T-clip. The dividers are available in lengths ranging from 140mm to 330mm but can be shortened as required - click here for instructions.

NB: Before you order, please check your measurements carefully. We are unable to accept back items which have been incorrectly measured.

These clear acrylic organiser trays with sliding dividers are designed to make access to all areas of your drawers easy and convenient. The trays fit into your drawer and can be easily removed and replaced for re-stocking.