Running out of space in your dispensary, fridge, surgery, shop, office, factory etc.? Want to better organise and display your product range and stock? Then we can help! The H+H System range of organiser products, designed and manufactured in Austria by H+H System GmbH, can increase your useable space by up to 30% whilst reducing picking-errors and stock holding.
We offer a number of systems designed to help organise shelves, drawers and fridges, along with ISO and DIN complete drawer systems. Full details of the different product ranges are shown below, but please don't hesitate to contact us if you require any further information or for a custom quote.
Organise your Drawers
The H+H System for drawers helps make messy drawers a thing of the past. The system creates separate clearly defined sections within the drawer keeping everything neat and tidy. The system can be customised to fit almost any size of drawer and is suitable for a wide range of applications and environments including medical, retail, product presentation, office and much more. The system can be easily altered as your requirements change and increases the amount of available space within each drawer. We welcome the chance to quote for specific and customised jobs and welcome enquiries from all parties from end-user to shop fitter.
The drawer system consists of the following components:
Slotted Rail Holder
This attaches to the front and back of the drawer. The space between each slot is 3mm. The slotted rail in available in two heights - 35mm and 55mm. For higher drawers, a combination of the two sizes may be used.
To divide your drawer crossways you will need to purchase additional acrylic dividers. You will need the same height dividers as drawer rail. The dividers are available in lengths ranging from 140mm to 330mm but can be shortened as required. We can also supply custom sized dividers if required.
The drawer rail fits into the slotted rail holder creating compartments from front to back. Drawer rail is available in aluminium or acrylic (both 3mm thick). The aluminium is more suitable for longer lengths as it is more rigid. The rail is stocked in 1m lengths, but can be cut to order - however, we can accept no responsibility for incorrect measurements.
Organise your Shelves
The H+H System for shelves helps make untidy and disorganised shelves a thing of the past. The system divides your shelf into separate but flexible sections, keeping everything neat and tidy, reducing the chance of picking errors whilst increasing the amount of available space. The system is suitable for a wide range of applications and environments including medical, retail, product presentation, office and will fit almost any shelf. The system comes in two distinct styles - open front and closed front (although this can also be closed rear). We welcome the chance to quote for specific and customised jobs and welcome enquiries from all parties from end-user to shop fitter.
The open front system consists of the following components:
Aluminium Shelf Rail
This attaches to the front of the shelf. It is secured via a strong self adhesive tape (supplied). The rail is stocked in 1m lengths, but these can be cut to order - however, we can accept no responsibility for incorrect measurements. The shelf rail extends 25mm from the front of the shelf.
Open Front Dividers
The dividers clip onto the shelf rail to create separate, yet flexible divisions. The dividers are 55mm high and come in lengths of 170mm and 330mm. Other lengths can be made to order.
The closed front (rear) system consists of the following components:
Acrylic Shelf Rail
The most common type of shelf rail is the L shaped acrylic option which attaches to either the front or rear of your shelf. It is secured via strong self adhesive tape (supplied).
There are two alternative shelf rail options - a straight, clear acrylic rail which fits into the groove at the front or rear of the shelf (3mm) or a straight clear acrylic rail which fixes to the front of the shelf with self adhesive tape.
The rail comes in both 35mm and 55mm heights and is stocked in 1m lengths, but these can be cut to order - however, we can accept no responsibility for incorrect measurements.
A range of dividers (in both 35mm and 55mm heights) are available and these simply clip on to the shelf rail to create distinct but flexible compartments.
We can produce custom dividers to virtually any length or height, along with design options such as a 90 degree bend at the front to create space for pricing labels for example, when combined with a rear mounted shelf rail. Please just contact us for more information.
Organise your Fridge
H+H System offer a wide range of fridge organiser systems, from simply acrylic trays to aluminium drawer systems. All offer the flexibility the H+H system is famous for - increasing the amount of usable space within the fridge, whilst reducing the chance of picking errors. The system also helps prevent overstocking which can help with cashflow. Please contact us for more information and prices.
The acrylic trays consist of a simple tray with cross dividers which form simple sections. This tray sits on the existing fridge shelf. It is simple to retrieve the tray, make the selection and return the tray to the shelf. These trays are also suitable for general use on retailing or dispensary shelves. The trays are stocked in a range of sizes to suit most refrigerators.
This ABS plastic drawer slides directly into the inserts on the interior fridge wall after removing the shelf. The H+H divider system is fitted as standard and extra dividers may be purchased and retrofitted where required. The drawer slides in and out easily to access the contents. It is also possible to have a combination of the drawer and shelves, if required. The CoolModul is available in a range of sizes to fit most Liebherr fridges.
This ABS plastic drawer is designed to sit on the existing shelf of the fridge. The H+H divider system comes as standard and more dividers can be ordered and retrofitted if required. The CoolTray is made in one size to fit all fridges with an internal measurement of more than 460mmx410mm. Please ensure that there is a 1-2 cm gap around the CoolTray in order for the air to circulate efficiently.
This ABS plastic drawer has an aluminium frame which slides easily into the inserts on the sidewall of the fridge (replacing the original shelf). The CoolDrawer slides easily into this frame. The H+H divider system comes as standard and more dividers can be ordered and retrofitted if required. It is possible to have a combination of the drawers and shelves, if required. The CoolDrawer is available in a range of sizes to fit most Liebherr fridges.
Aluminium Drawer System
This complete multi-drawer unit slides easily into the inserts on the fridge sidewall and contains the sliders for the drawers. The AluCool drawers slides in and out for easy access to the contents. These are readily available for the Liebherr range of fridges and can be retrofitted at any time.
Custom built units are also available as long as the fridge interior sidewalls have inserts for the existing shelves. We would need certain dimensions for this. It would helpful to have the make and model of the fridge along with the approximate age. Please contact us for more information.
This lightweight aluminium drawer has a fixed frame which slides directly into the side inserts on the interior fridge wall, replacing the existing shelf. The drawer slides in and out easily in order to access the contents. The H+H divider system is fitted as standard and extra dividers can be ordered and retrofitted if required. The AluCool Drawer is available in a range of sizes to fit most Liebherr fridges as standard, but custom designed units can be manufactured for most models of fridges - please ask for further details.
H+H System Modular Organiser Systems
The H+H System Modular range of organiser systems are designed around industry standard sizes and offer unrivalled flexibility. The organiser trays can be divided to maximise space and reduce errors. The system can be used wherever optimised spaced usage and tidiness is required. The system comes in ISO (660x460mm system size) and DIN (600x600 system size). The trays can be held in place via either supporting walls or telescopic rails. The trays come in a range of heights and materials offering maximum flexibility with a range of options customise your modular system. Please contact us for more information and for pricing information.